Instructions For Authors

Organization of Sections in an Article

Cover Page

The cover page includes (a) A complete manuscript title; (b) A list of all authors’ full names, highest academic degrees, professional titles, affiliations, and locations of affiliations; (c) Name, address, telephone number, e-mail address, and a passport size (2×2 inches or 51×51 cm) photograph of the corresponding author with a plain background and high resolution (not blurry, grainy or pixelated). Do not use computer software, phone apps, filters, or artificial intelligence to modify your photo; and (d)…..[The rest will remain the same].

Abstract

An abstract is required for all categories of manuscripts.

For Original Research and Review articles, the abstract should be structured and divided into four sections: Background and Objective, Methods, Results, and Conclusion and Implications for Translation. It should not exceed 300 words.

For Editorials, Commentaries, Letters to the Editor, and Replies, the abstract should be unstructured and should not exceed 100 words.

Abstracts should not contain any figures, tables, or references, trade names, or manufacturer’s names.

Keywords

Provide up to 5-8 keywords at the end of the abstract. To the best of their abilities, authors should key words from MeSH (Medical Subject Headings), the NLM controlled vocabulary thesaurus used for indexing articles for PubMed. Authors can search keywords in the MeSH browser through this hyperlink .

Background and Introduction

All articles need a Background and Introduction section that describes the objectives of the investigation in not more than 3,000 words. This section must include review of the literature, identification of the gaps in the literature which will logically lead to why the current study fills or addresses the gap. The author should clearly state the specific goal or purpose of the article, and indicate why it is worthy of attention. In the introduction, describe the hypothesis to be tested, the dilemma to be resolved, or the deficiency to be remedied.

Methods

The research plan, the materials (or subjects), and the methods used should be described. An explanation of how the disease was confirmed and the controls used must be included, as well as the details of the data obtained and how it was analyzed. Authors are required to mention the specific reporting guideline that they followed for their study.

Methods can be presented with subheadings such as: study design, participants, assessments, statistical analysis, Methods must include the following aspects:

When a surgical device is mentioned in the manuscript for the first time, its manufactures complete detail should be mentioned such as the BRANDED name of the device/medication followed by name of the manufacturer, city, and state. For example IVC filter (C.R. Bard, Inc. Murray Hill, New Jersey, USA). Please mention the name of the Ultrasound machine, its manufacturer, and the country of origin. In addition please mention the type of transducer and its frequency used for the study. This should be mentioned in the methods or the section where you describe how the ultrasound was performed. For Example GE, Logiq E9, Milwaukee, USA

Ethics: When reporting studies on human subjects, indicate whether the procedures followed were in accordance with the ethical standards of the responsible committee on human experimentation (institutional or regional) and with the Helsinki Declaration of 1975, as revised in 2000 (available at https://www.wma.net/policies-post/wma-declaration-of-helsinki-ethical-principles-for-medical-research-involving-human-subjects/). For prospective studies involving human participants, authors are expected to mention about approval of (regional/national/institutional or independent Ethics Committee or Review Board, obtaining informed consent from adult research participants and obtaining assent for children aged over 7 years participating in the trial. The age beyond which assent would be required could vary as per regional and/or national guidelines. Ensure confidentiality of subjects by desisting from mentioning participants’ names, initials or hospital numbers, especially in illustrative material. When reporting experiments on animals, indicate whether the institution’s or a national research council’s guide for or any national law on the care and use of laboratory animals were followed.

Evidence for approval by a local Institutional Review Board or Ethics Committee (for both human as well as animal studies) must be supplied by the authors. Animal experimental procedures should be as humane as possible and the details of anesthetics and analgesics used should be clearly stated. The ethical standards of experiments must be in accordance with the guidelines provided by the international and local compliance organizations such as World Medical Association’s Declaration of Helsinki on Ethical Principles for Medical Research Involving Humans for studies involving experimental animals and human beings, and their local equivalents such as the Animal Welfare Act, the Institutional Animal Care and Use Committee (IACUC),  Committee for the Purpose of Control and Supervision of Experiments on Animals (CPCSEA), etc.  The journal will not consider any manuscript which is ethically unacceptable. A statement on ethics committee permission and ethical practices must be included in all original research manuscripts under the ‘Methods’ section.

Patient Consent: Patient anonymity must be maintained in all submissions. If there is any possibility that the patient can be identified in a figure, written consent must be obtained from the patient or parent/guardian by the author, and a line stating that this has been received is included in the article.

Study Design

Selection and Description of Participants: Describe your selection of the observational or experimental participants (patients or laboratory animals, including controls) clearly, including eligibility and exclusion criteria and a description of the source population. Author must identify the reporting guideline that they followed for their research.

Technical Information: Identify the methods, apparatus (give the manufacturer’s name and address in parentheses), and procedures in sufficient detail to allow other researchers to reproduce the results. Give references to established methods, including statistical methods (see below); provide references and brief descriptions for methods that have been published but are not well known; describe new or substantially modified methods, give reasons for using them, and evaluate their limitations. Identify precisely all drugs and chemicals used, including generic name(s), dose(s), and route(s) of administration.

Reports of randomized clinical trials should present information on all major study elements, including the protocol number and date, assignment of interventions (methods of randomization, concealment of allocation to treatment groups), and the method of masking (blinding), based on the CONSORT Statement (http://www.consort-statement.org).

Statistical Analysis

Whenever possible quantify findings and present them with appropriate indicators of measurement error or uncertainty (such as confidence intervals). The author should systematically report the details of the statistical analyses that were performed in a manner that supports the replication of their analysis by other researchers. The authors should report losses to observation (such as dropouts from a clinical trial). When data are summarized in the Result section, specify the statistical methods used to analyze them. Avoid non-technical uses of technical terms in statistics, such as ‘random’ (which implies a randomizing device), ‘normal’, ‘significant’, ‘correlations’, and ‘sample’. Define statistical terms, abbreviations, and most symbols. Specify and cite the computer software used. For all P values include the exact value and not less than 0.05 or 0.001. Mean differences in continuous variables, proportions in categorical variables and relative risks including odds ratios and hazard ratios should be accompanied by their confidence intervals.

Results

All results should be in a clear, logical sequence and should adhere to the specific objective of the paper. Data presented in tables should not be duplicated in the text. Important trends and points observed in the study will need to be described. Results can be broken down into subheadings focusing on specific variables such as the sociodemographic characteristics of the study participants, Dependent variable results, etc. When data are summarized in the Results section, give numeric results not only as derivatives (for example, percentages) but also as the absolute numbers from which the derivatives were calculated, and specify the statistical methods used to analyze them. Restrict tables and figures to those needed to explain the argument of the paper and to assess its support. Use graphs as an alternative to tables with many entries; do not duplicate data in graphs and tables. Where scientifically appropriate, analyses of the data by variables such as age and sex should be included.

Discussion

The article submitted should explain clearly the outcome of the research considering the goals and results obtained. Any limitations on the materials or subjects and methods must be included. How the results differ from those obtained by previous investigators need to be presented with adequate comparisons and explanations. Include key findings (primary outcome measures, secondary outcome measures, results as they relate to a prior hypothesis); Strengths and limitations of the study (study question, study design, data collection, analysis and interpretation); Interpretation and implications in the context of the totality of evidence should be described. Include what this study adds to the available evidence, effects on patient care and health policy, etc.

Do not repeat the data or other material mentioned in the Introduction or the Results section. In particular, contributors should avoid making statements on economic benefits and costs unless their manuscript includes economic data and analyses. Avoid claiming priority and alluding to work that has not been completed.

Conclusion and Implications for Translation

The conclusions of the study must be directly supported by the results of the study. Equal emphasis should be given to both positive and negative findings that have equal scientific merits. Offer a relevance statement that outlines the practical significance for clinical practice or health policy, refraining from speculation and broad assumptions. This statement should also address the need for further research before implementing the information in clinical environments.

Key Messages

Authors should include 3-5 bulleted key messages (KM) that provide the non-technical key take-aways of the findings of their study. The KMs are presented in plain language and are usually used for regular and social media publication of the article.

Compliance with Ethical Standards

In compliance with best publishing practices, authors must provide information on ethical consideration as outlined below.

• Conflicts of Interest:
• Financial  Disclosure:
• Funding/Support:
• Ethics  Approval:
• Declaration of Patient Consent:
• Acknowledgments:
• Disclaimer:

References

The journal uses the Vancouver (International Committee of Medical Journal Editors) citation style. This citation style is also known as the Uniform Requirements for Manuscripts Submitted to Biomedical Journals and is used primarily for publications in medicine, biomedicine, medical technology and allied health sciences.

References are to be numbered sequentially in the order in which they appear in the manuscript. Reference numbers are typed as superscripts, enclosed by square brackets, after the punctuation mark at the end of the line.

Example: …… with prior literature demonstrating racial and ethnic disparities in health outcomes in the United States.[1]

Refer to the NLM Catalog for abbreviations of journal names (https://www.ncbi.nlm.nih.gov/nlmcatalog/journals /).

Authors using any reference management software such as EndNote, Zotero, Reference Manager or others, please use the following output style – Vancouver. You must convert the file to plain text prior to submission.

Samples of reference style and format taken from  

https://www.nlm.nih.gov/bsd/uniform_requirements.html

• Articles in Journals
• Books and Other Monographs
• Other Published Material
• Unpublished Material
• Electronic Material

Tables

Tables must be significant and provide a good summary of the study. Tables should be self-explanatory and not duplicate the data given in the text or figures. Each table must have a descriptive title, and each column a heading. Tables must contain a minimum of four lines and two columns of data and not exceed 10 columns and 25 rows. Tables are numbered in the order in which they are cited in the text. Abbreviations used in the tables are defined below each table. All arithmetic calculations (percentages, totals, differences) must be double-checked for accuracy, and data must agree with the data given in the text.

Graphs

Graphs need to be exported as JPEG or TIF images and submitted as figures. Graphs and line drawings need to be a minimum of 1000 dpi. Graphs should include clearly labeled error bars described in the figure legend. The authors must state whether a number that follows the ± sign is a standard error (SEM) or a standard deviation (SD). The number of independent data points (N) represented in a graph must be indicated in the legend. Numerical axes on graphs should go to 0, except for log axes..

Figure/Image Legends

All figure parts relating to one image should have the same figure number. The style for figure legends is given here:
Figure 1: Age and gender of the patient followed by presenting symptoms and subsequent diagnosis. Imaging modality used, organ/section imaged, view, and abnormality seen in the image. Add arrows pointing to the abnormality seen in the image.
Example: Figure 1: 42-year-old woman with Behçet disease who presented with dyspnea. (a) Contrast-enhanced CT image shows the increased diameter of both middle and lower lobe pulmonary arteries (arrows) on the right; the aneurysms are partially thrombosed. (b) CT image with lung window shows well-defined lung parenchymal nodules (arrow) corresponding to the aneurysms.

Written permission to reprint in print and electronic media, including online use, must be obtained for all previously published illustrations, and an appropriate credit line to be given in the legends.

Figures/Images

All images should be uploaded in JPEG, or TIF, format. The file size should be within 12 MB in size. Figures should be numbered consecutively according to the order in which they have been first cited in the text. Labels, numbers, and symbols should be clear and of uniform size. The lettering for figures should be large enough to be legible after reduction to fit the width of a printed column. Symbols, arrows, or letters used in photomicrographs should contrast with the background and should be marked neatly with transfer type or by tissue overlay and not by pen. Titles and detailed explanations belong in the legends for figures not on the figure/image themselves. The photographs and figures should be trimmed to remove all the unwanted areas and the patient’s name and medical record number. If photographs of individuals are used, their pictures must be accompanied by written permission to use the photograph and eyes must be covered. If a figure has been published elsewhere, the original source must be acknowledged and written permission from the copyright holder submitted to reproduce the material. A credit line should appear in the legend for such figures. Electronic manipulation of images that materially alters the medical information must be identified and the nature of the alterations described. Symbols used must be uniform in size and style and large enough to withstand reduction. Line drawings and graphs should be in black on a white background, using the same size type as the text. 0.5 mm hairline rules must be avoided. Authors’ names and affiliations must not appear anywhere on the images.

Image Size

Black & white images: JPEG, or TIF format, Grayscale mode, and 300 DPI resolution. The height and width of an image should be at least 6 x 5 inches.

Color images: 300 DPI resolution, no layered files, no alpha channels. Color profile if used: CMYK (No Indexed Color, Lab, or RGB profiles)

Line art: 1200 DPI resolution, Grayscale or Jpeg format. No layered files, no alpha channels. Color profile if used: CMYK (No Indexed Color, Lab, or RGB profiles) The Journal reserves the right to crop, rotate, reduce, or enlarge the photographs to an acceptable size.

Video Clips

The journal encourages authors to submit video clips, cine clips, or real-time images (preferably in ‘mp4’). The maximum size of each multimedia file should not exceed 400 MB. In addition to the video content, authors must provide a still image from each video file. Supply TIFF or JPEG filesC